Free trading tool

Position Size Calculator

Decide how much you're prepared to lose first. Then let the calculator work out how big your trade should be, based on your account size, risk, entry and stop-loss.

Calculate Your Position Size

Enter a % or an amount — the other updates automatically.

Position Size 0.10 lots 10,000 units

Forex: 1 standard lot = 100,000 units, 1 mini = 10,000, 1 micro = 1,000. Lots are rounded down to the nearest micro lot so you never risk more than planned. Figures exclude fees, spreads and slippage.

How Does the Position Size Calculator Work?

Position sizing answers one question: how big can this trade be without risking more than I planned?

Most traders do it the other way round. They pick a size first and hope the risk fits. This calculator starts from the loss you're willing to accept and works backwards from there. It needs three things:

Account Balance

The capital in your trading account.

Risk Per Trade

The % of your account, or the fixed amount, you're prepared to lose.

Stop-Loss Distance

How far price can move from your entry before the trade is invalid.

Once you know those three, the position size follows.

How to Calculate Position Size in Forex

  1. Work out your account risk

    Decide what share of your account you'll risk on this trade.

    $10,000 × 1% = $100 If your stop is hit, you lose about $100, before fees, slippage and other costs.
  2. Measure your stop-loss distance

    Measure how far your entry is from your stop. On EUR/USD with an entry at 1.2000 and a stop at 1.1900:

    1.2000 − 1.1900 = 100 pips For most pairs, 1 pip = 0.0001. For JPY pairs, 1 pip = 0.01.
  3. Find your pip value

    Pip value depends on the pair, your position size, your account currency and, where conversion is needed, the exchange rate. For EUR/USD with a USD account:

    LotUnitsPip value
    Standard100,000≈ $10.00
    Mini10,000≈ $1.00
    Micro1,000≈ $0.10
  4. Calculate your position size

    Divide the amount you're risking by what the stop would cost on one standard lot.

    Lots = Amount at Risk ÷ (Stop Distance in pips × Pip Value per lot) $100 ÷ (100 × $10) = 0.10 lots = 10,000 units

    So a 10,000-unit position loses about $100 if the stop is hit.

Stocks, crypto and other markets

With no lots or pips involved, the maths is simpler. Divide the amount you're risking by the price distance to your stop:

Units = Amount at Risk ÷ (Entry − Stop-Loss) Risk $100, buy at $50, stop at $48 → $100 ÷ $2 = 50 shares

Position Size Example

Account balance$20,000
Risk per trade1% = $200
Stop-loss distance50 pips
Pip value per standard lot$10
Position size$200 ÷ (50 × $10) = 0.40 lots (40,000 units)

If price reaches the 50-pip stop, you lose about $200 (before costs and slippage), which is exactly the 1% you planned.

GIVE US 14 DAYS

A real 14-day test drive — not a sales pitch.

Come inside for $0.99 and see how our analysts read the market — then decide for yourself.

✓Access Chart Updates
✓Follow the analysts
✓See the Blue Boxes
✓Ask questions

Instant accessCancel with 24 hours' noticeNo commitment

Your Trial
First 14 days
$0.99
Then, Unless Cancelled
Gold Plan, monthly
$199.99/mo
★★★★★Trustpilot
"My profits consistently exceed the cost of the service, while also improving my own intuition and anticipation of market movement."
— Bill Dolan

Why Position Size Matters

Position sizing is one of the foundations of risk management. A great-looking setup doesn't justify a big position. Your size should come from how much you're prepared to lose if the trade fails, not from how confident you feel.

A position size calculator helps you:

What Is Trade Risk?

Trade risk is how much you lose if price moves from your entry to your stop-loss. Two things decide it: your stop distance and your position size.

A wider stop doesn't have to mean risking more money. Make the position smaller and your total risk stays the same.

Position Size and Stop-Loss Work Together

Here are two EUR/USD trades on a USD account. Both risk $100:

TradeRiskStop-lossPosition size
Trade A$10020 pips0.50 lots (50,000 units)
Trade B$100100 pips0.10 lots (10,000 units)

A tight stop allows a bigger position. A wide stop needs a smaller one. The amount at risk never changes. Only the size does.

Why fixed lot sizes don't work: if you trade the same lot size every time, your risk jumps around whenever your stop distance changes. Your stop changes from trade to trade, so your position size should change with it.

What Percentage Should You Risk Per Trade?

No single percentage suits every trader. The right amount depends on:

Many traders risk a fixed percentage on every trade. Positions then shrink automatically during losing streaks and grow gradually as the account grows. The table below shows how much that choice matters when things go wrong:

Risk per tradeRisk on $10,000Drawdown after 10 losses in a row*
0.5%$50−4.9%
1%$100−9.6%
2%$200−18.3%
5%$500−40.1%

*Risking the same % of the current balance on each trade, before costs.

Whatever approach you choose, set your maximum acceptable loss before you enter the trade.

Currency Conversion

Forex sizing gets slightly trickier when your account currency isn't the pair's quote currency. For example, you might have a GBP account and trade EUR/USD.

EUR/USD pip values are in USD, so they have to be converted to GBP. If 1 USD = 0.80 GBP, a $10 pip value per standard lot becomes £8 per lot.

The calculator handles this for you:

Position Size Is About Controlling the Loss

Most traders start with how much a trade could make. Position sizing starts from the opposite end:

How much am I prepared to lose if I'm wrong?

Answer that first, and your risk becomes intentional instead of accidental. Once your size is set, check whether the trade is worth taking with our Risk / Reward Calculator.

Frequently Asked Questions

What Is A Lot In Forex?

A lot is a standard trade size. A standard lot is 100,000 units of the base currency, a mini lot is 10,000 and a micro lot is 1,000. So 0.10 lots is one mini lot, or 10,000 units.

How Do I Calculate Pip Value?

Multiply the pip size by the number of units, then convert the result into your account currency if needed. On EUR/USD, 0.0001 × 100,000 units = $10 per pip for one standard lot.

Should I Risk The Same Percentage On Every Trade?

Many traders do, because it keeps risk consistent and automatically reduces position size during losing streaks. The right percentage depends on your strategy, track record and how much drawdown you can tolerate.

What If My Broker Doesn't Allow The Exact Position Size?

Round down to the nearest size your broker allows, so your risk stays at or below your limit. The calculator already rounds forex positions down to the nearest micro lot and shows the risk at that size.

Does Position Size Change My Risk/Reward Ratio?

No. Your risk/reward ratio comes from the distance between your entry, stop and target. Position size scales both the potential loss and the potential profit by the same amount. Use the Risk / Reward Calculator to check the ratio.

Final Thoughts

You can't control whether the market reaches your target. You can control how much capital you put at risk.

Define your risk first. Place your stop where your setup says it belongs. Then calculate the position size that keeps any loss within your limits.

Choose the risk first. Let the position size follow.

This calculator and the information on this page are for educational purposes only and are not financial advice. Pip values and contract sizes can vary by broker and instrument, so check your broker's specifications. Trading involves risk, and results do not account for fees, spreads, slippage, swaps or taxes.